Research & Insights
Dried Brewers' Spent Grain from Vietnam: Composition, Feed Use and Specification
Published

In short: dried brewers' spent grain is the cereal residue left after wort is drawn off in the brewhouse, dried into a stable feed material. TBESBY Dried Brewers' Grains are specified at a minimum of 20% crude protein and 5% fat, a maximum of 16% crude fibre and 10% moisture, and no more than 10 µg/kg aflatoxin B1. A reference sample tested by an accredited laboratory in March 2026 returned 29.2% crude protein at 8.06% moisture.
This page is for feed mill buyers, ruminant nutritionists and ingredient importers. It covers what the product is, the figures on the TBESBY specification, how those figures sit against published feed tables, where the ingredient fits in a ration, and how it is packed and shipped.
What is dried brewers' spent grain?
Brewing extracts starch and sugars from malted barley and other cereals. What remains is the husk, the protein and the fibre of the grain. Fresh from the brewery it is wet and has to be used within days. Drying brings moisture below 10%, which gives an ingredient that stores, ships in containers and doses accurately in a feed mill. Feed tables list it as brewers grains, dehydrated. The trade shortens it to BSG or DBSG, and the EU Catalogue of feed materials, Regulation (EU) No 68/2013, names it brewers' grains.
| Item | TBESBY Dried Brewers' Grains |
|---|---|
| Product code | TBES-BSG-01 |
| Cereal base | Malted barley. Wheat, rice or maize adjuncts may be present, depending on the brewery recipe |
| Origin | Vietnam, from spent grain of contracted breweries |
| Physical form | Dried, free-flowing meal and flake, brown to dark brown. Pelleted form on request |
| Customs code | HS 2303 30 (brewing or distilling dregs and waste) |
| GMO status | Produced from non-genetically-modified cereals |
| Animal origin | None. Plant feed material only |
| Additives | No additives, preservatives or processing aids added |
| Bulk density | About 250 to 350 kg/m³, indicative |
What does the TBESBY specification guarantee?
| Parameter, as fed | Guaranteed limit | Typical value | Method |
|---|---|---|---|
| Moisture | Max. 10.0% | 9.0% | TCVN 4326:2001 |
| Crude protein (N × 6.25) | Min. 20% | 23% | TCVN 4328-1:2007 |
| Crude oils and fats | Min. 5.0% | 7.0% | TCVN 4331:2001 |
| Crude fibre | Max. 16.0% | 13.1% | TCVN 4329:2007 |
| Crude ash | Max. 6.0% | Declared per lot | TCVN 4327:2007 |
| Aflatoxin B1 | Max. 10 µg/kg | Not detected (below 0.5 µg/kg) | TCVN 7596:2007 |
The guaranteed limits are the contractual figures. Typical values are indicative, and each lot ships with its own certificate of analysis for these parameters.
The reference sample behind this specification was analysed by QUATEST 2, an accredited national laboratory in Vietnam, in March 2026. It returned 29.2% crude protein, 7.67% fat and 13.1% crude fibre at 8.06% moisture, with aflatoxin B1 not detected at a detection limit of 0.5 µg/kg. The specification sets its typical and guaranteed protein below that result on purpose. Brewery recipes change with the beer being made, and a limit that allows for this variation is one a buyer can formulate against with confidence.
How does it compare with published feed tables?
Spent grain is the largest co-product of brewing. Mussatto, Dragone and Roberto (2006), in a widely cited review of the material, put it at about 85% of all by-products a brewery generates. Because so much of it is produced, it is one of the better documented feed ingredients. The Feedipedia datasheet for dehydrated brewers grains gives these averages on a dry matter basis:
| Parameter | Feedipedia average, % of dry matter | Published range |
|---|---|---|
| Crude protein | 25.8 | 19.5 to 31.9 |
| Crude fibre | 15.8 | 11.8 to 19.9 |
| NDF | 56.3 | 42.3 to 67.4 |
| ADF | 21.9 | 15.5 to 28.6 |
| Ether extract (fat) | 6.7 | 1.9 to 9.9 |
| Ash | 4.6 | 3.1 to 7.8 |
Converted to dry matter, the TBESBY typical value of 23% crude protein at 9% moisture is about 25.3%, in line with the table average. The March 2026 reference sample works out at about 31.8% of dry matter, at the upper end of the published range. Crude fibre in that sample is about 14.2% of dry matter, below the table average of 15.8%.
How does it differ from dried brewer's yeast?
The two ingredients leave the same brewery at different stages, and buyers sometimes confuse them because both are called spent. Spent grain comes out of the brewhouse before fermentation. Spent brewer's yeast is recovered after it.
| Dried brewers' spent grain | Dried brewer's yeast | |
|---|---|---|
| Origin in the brewery | Brewhouse, after mashing | Fermentation, after the beer is drawn off |
| What it is | Cereal husk, protein and fibre | Inactive yeast cells |
| Crude protein | Min. 20%, typical 23% | 40 to 46% |
| Fibre | High, up to 16% crude fibre | Very low |
| Customs heading | HS 2303 30 | HS 2102 20 |
| Main use | Dairy and beef rations, livestock feed | Pet food, aquafeed, piglet and poultry feed |
Where does it fit in a ration?
Ruminant nutritionists use dried spent grain as a mid-protein ingredient that also brings digestible fibre, so it can take the place of part of the protein meal and part of the cereal by-products in a dairy or beef concentrate. It is also used in swine, poultry, rabbit and aquaculture feeds and in pet food where fibre is wanted. The inclusion rate depends on the rest of the ration and is set by the formulator. Buyers who run several brewery and distillery co-products can read our guides to brewer's yeast for dairy cows and brewer's yeast compared with DDGS alongside this page.
Why do dairy nutritionists value the protein?
A large share of the protein in brewers grains passes through the rumen without being broken down and is digested further along the gut. Feedipedia reports effective nitrogen degradability of about 41 to 49% across feed tables and trials (Sauvant et al., 2004; Batajoo et al., 1998; Volden, 2011), which makes it richer in rumen undegradable protein than most plant feeds. High-yielding dairy cows need more of this by-pass protein than rumen microbes can supply, which is why brewers grains have a long record in dairy concentrates.
The fibre has a use of its own. De Brabander and colleagues (1999) measured 56.6 minutes of chewing per kg of dry matter for brewers grains, against 32.3 minutes for beet pulp. More chewing raises saliva flow and helps buffer the rumen. Younker and colleagues (1998) replaced part of the forage in dairy diets with dried brewers grains successfully, and Porter and colleagues (1977) saw no difference in performance between dried and wet grains. The dried form gives the nutrition of the fresh material with the handling of a dry ingredient.
What inclusion rates does the literature report?
| Animal | Reported inclusion | Source, as cited by Feedipedia |
|---|---|---|
| Dairy cows | Usually up to 20 to 25% of concentrate dry matter, or 15 to 20% of total diet dry matter | Feedipedia summary |
| Dairy cows | Up to 30% recommended, with no effect on milk production reported at that rate | Ewing (1997); West et al. (1994) |
| Beef cattle | Rates as high as 40% considered acceptable | Ewing (1997) |
| Gestating sows | Up to 40% of dry matter with lysine held at 0.5% | Wahlstrom et al. (1976) |
| Laying hens | 10% without effect on egg production | Yeong et al. (1986); Jensen et al. (1976) |
| Rabbits | 5 to 20% in the control diets of published studies | Feedipedia summary |
These are published levels. The rate for a specific ration depends on the forage, the other protein sources and the production target, and the formulator sets it.
Which values can a formulator use for the ration matrix?
Beyond the guaranteed parameters, the TBESBY specification gives an indicative nutritional profile for ration formulation. The ranges come from published feed composition tables for dried brewers' grains and from production experience. They are guidance only. Lot-specific figures for any of them can be analysed and certified by prior agreement.
| Parameter, dry matter basis | Typical range | Parameter | Typical range |
|---|---|---|---|
| NDF | 45 to 55% | Lysine | 0.7 to 0.9% |
| ADF | 18 to 25% | Methionine | 0.4 to 0.6% |
| Starch | 2 to 8% | Threonine | 0.9 to 1.1% |
| Calcium | 0.2 to 0.4% | ME, ruminants | 10.0 to 11.0 MJ/kg DM |
| Phosphorus | 0.4 to 0.6% | NEL, dairy cattle | 6.0 to 6.8 MJ/kg DM |
| Crude ash | 3.5 to 4.5% | DE, swine | 11 to 13 MJ/kg DM |
Which safety limits does the specification set?
The limits follow EU feed law, which is the reference most importers work to. For aflatoxin B1 the TBESBY limit is half the EU statutory maximum of 20 µg/kg for feed materials under Directive 2002/32/EC.
| Parameter | TBESBY limit | Reference |
|---|---|---|
| Aflatoxin B1 | Max. 10 µg/kg | Directive 2002/32/EC (EU maximum 20 µg/kg) |
| Lead | Max. 10 mg/kg | Directive 2002/32/EC, feed at 12% moisture |
| Cadmium | Max. 1.0 mg/kg | Directive 2002/32/EC |
| Mercury | Max. 0.1 mg/kg | Directive 2002/32/EC |
| Arsenic, total | Max. 2.0 mg/kg | Directive 2002/32/EC |
| Salmonella | Absent in 25 g | Agreed sampling plan |
| Enterobacteriaceae | Max. 300 CFU/g | Feed-safety assurance practice |
| Yeasts and moulds | Max. 10,000 CFU/g | Indicator of drying and storage condition |
Certificates for a wider mycotoxin panel, heavy metals, dioxins and microbiology are available by prior agreement. The product contains no antibiotics, growth promoters, hormones or animal protein.
How is it produced?
Wet spent grain is collected from contracted breweries in dedicated covered vehicles and processed without delay. At our own facilities in Vietnam it passes an acceptance check, then mechanical dewatering, thermal drying, cooling, screening and magnetic separation before weighing and packing. Production runs under a HACCP-based control plan with control points for drying temperature, residual moisture and foreign-material removal. Each lot carries a code that links the finished product to its brewery source, drying batch and packing date.
Why buy it dried?
Wet brewers grains are roughly three-quarters water, so they are used near the brewery that makes them. Drying removes that limit. A dried product below 10% moisture ships in containers, stores in a normal feed warehouse and runs through the same dosing equipment as other dry ingredients. For an importer or a feed mill far from a brewery, the dried form is the practical way to put this ingredient in a formula. A mill that already buys TBESBY dried brewer's yeast can also place both ingredients on one supply programme. There is a sustainability case as well. Dried brewers' grains are an upcycled co-product: feeding them keeps a nutrient-rich stream in the food and feed chain and replaces part of the primary protein and fibre in compound feed.
How is it packed and shipped?
| Item | Detail |
|---|---|
| Packaging | 50 kg polypropylene bags with inner polyethylene liner, 500 to 1,000 kg big bags, or bulk in lined container |
| Loading, indicative | About 12 to 14 t per 20' container and 26 to 28 t per 40' high cube in bags. The product is volume-limited, so the quantity is confirmed per packing configuration at order stage |
| Storage | Sealed, on pallets, in a cool, dry, ventilated place below 30 °C and 70% relative humidity |
| Shelf life | 12 months from manufacture in the original, unopened packaging |
| Marking | Feed material name, operator name and address, lot reference, net quantity, moisture and the analytical declarations, in line with Article 15 of Regulation (EC) No 767/2009 |
| Documents per shipment | Commercial invoice, packing list, bill of lading, certificate of origin, lot certificate of analysis, non-GMO declaration, declaration of absence of animal by-products, and fumigation or phytosanitary certificate where the destination requires it |
What should the purchase specification cover?
- Guaranteed minimum crude protein and fat, as fed, with the test method named.
- Maximum moisture, crude fibre and ash.
- Mycotoxin and heavy metal limits that match the feed rules of the destination market.
- Packing format, payload per container and lot marking.
- A certificate of analysis with each lot, and which extra certificates are needed for the first shipment.
Frequently asked questions
What is dried brewers' spent grain used for?
Mainly dairy and beef rations, where it supplies protein and digestible fibre together. It is also used in swine, poultry, rabbit and aquaculture feeds and in pet food where fibre is wanted.
How much protein does dried brewers' spent grain contain?
The TBESBY specification guarantees a minimum of 20% crude protein as fed, with a typical value of 23%. A reference sample tested by an accredited laboratory in March 2026 returned 29.2%. Published feed tables give 19.5 to 31.9% on a dry matter basis.
Is spent grain the same as brewer's yeast?
No. Spent grain is the cereal residue from the brewhouse. Brewer's yeast is the yeast recovered after fermentation. They are separate ingredients with different protein and fibre levels and different customs headings.
What is the HS code for dried brewers' spent grain?
HS 2303 30, brewing or distilling dregs and waste. National tariff lines add digits after the first six, so the importer should confirm the full code at destination.
How is it packed and what is the shelf life?
In 50 kg polypropylene bags with an inner liner, in 500 to 1,000 kg big bags, or in bulk in a lined container. Shelf life is 12 months from manufacture in unopened packaging stored below 30 °C and 70% relative humidity.
Can spent grain and brewer's yeast ship together?
Ask us about combined programmes when you request a quotation, so the loading plan can be confirmed for your port.
For the full specification sheet, a recent certificate of analysis or a sample, contact the TBESBY team.
Sources
- Mussatto, S.I., Dragone, G. and Roberto, I.C. (2006). Brewers' spent grain: generation, characteristics and potential applications. Journal of Cereal Science, 43(1), 1-14.
- Feedipedia, Brewers grains datasheet (INRAE, CIRAD, AFZ and FAO), feedipedia.org/node/74, with the studies cited there: Sauvant et al. (2004), Batajoo et al. (1998), Volden (2011), West et al. (1994), Younker et al. (1998), De Brabander et al. (1999), Porter et al. (1977), Ewing (1997), Wahlstrom et al. (1976), Yeong et al. (1986), Jensen et al. (1976).
- TBES Product Specification TBES/PS-02/2026, Dried Brewers' Grains, Rev. 01, and third-party test report of March 2026 (QUATEST 2, Vietnam).
- Directive 2002/32/EC on undesirable substances in animal feed; Regulation (EU) No 68/2013, Catalogue of feed materials; Regulation (EC) No 767/2009 on the marketing and use of feed.